12 volt options for controlling a Remote Roller Shutter, Blind or Awning.


Please note: E-Trans remotes will only interact with RF E-Port controls.


The E-Series RF remotes are available in two options, the E-Trans 1 channel (15.560.001) and the E-Trans 9 channel (15.561.001). With a huge range of programming choices, you can control one Remote Roller Shutter on a single control or you are able to program a number of Roller Shutters on one single channel to operate simultaneously or operate a whole house load of shutters separately on different channels.

Programming is simple:

Choose the channel on your remote that you wish to have registered with a particular E-Port.

With the E-Trans in one hand, hold down the middle ‘STOP’ button on both the E-Port control and the E-Trans remote.

Hold for 5 seconds or until you see the E-Ports LED light flash three times and that control is now set.

Email us