Motors

The E-Series range by Ozroll was designed in Australia to as an option for motorizing Roller Shutters without involving any expensive or dangerous electrical costs. Since the inception of this range in 2005, the L10 and T-Series 12 volt tubular motor range have revolutionized our industry. These products have been successfully exported into almost every continent on the planet and are utilized for not only Roller Shutters, but also a wide range of Outdoor Blinds and Awnings.

DOWNLOAD PDF
tseries2

T Series

Each T-Series 12 volt tubular motor has has been specifically designed to work in conjunction with Ozroll’s low voltage DC controllers. Internationally renowned for a smooth, quiet and reliable operation, each T-Series motor is provided with a tool to set the up and down limits using progressive twist limit settings.r.

L10

The ODS L10 motor is a 12V lateral motor which has been specifically designed to work in conjunction with Ozroll’s low voltage DC controllers.

This motor can fit in end plates 165mm and above, making it available for use in shutters when the width is too small for a tubular motor, such as bathroom windows or bay windows. An internal gear works as a down stop for the motor which is set in our factory during assembly. Resistance causes the motor to stop on the way up which is achieved by using stops in the shutter guide. This means there is no limit settings required during installation.

l10

Ask us a question